ProComm Magnet Mount CB Antenna
- Category: CB Antennas, Magnet Mount CB Antennas
The ProComm PC36 magnet mount CB antenna has a stainless steel 30" whip. The strong 3" black magnet mount can be used on any metal surface including a roof or trunk. Included with the PC36 is 12' of quality RG58 coax cable. This coax cable has a PL259 connector on the end that fits onto any CB radio. The maximum power input on this antenna is 75 watts.
Simply install the magnet mount base on to any metal surface including a roof or trunk. Run the included 12' of coax cable from the antenna to your CB radio.
What's In The Box
ProComm PC36 Magnet Mount CB Antenna
Allen Wrench (For Tuning)
30" Stainless Steel Whip
FTL Distributing offers a 2 year warranty on the ProComm PC36 magnet mount CB antenna. This does not cover damages caused by abuse, misuse, negligence (i.e. hitting overhead objects, improper installation) are considered to be avoidable circumstances. To obtain warranty information on your product just send an email to email@example.com
The range of the ProComm PC36 CB antenna will vary greatly depending on surroundings, weather, etc. You can normally expect this range:
The ProComm PC36 CB antenna has a sliding whip for easy SWR tuning. If the SWR is greater on Channel 40 than on Channel 1, then you have an electrically long antenna and need to make it smaller by sliding in the whip to the base. If the SWR is greater on Channel 1 than on Channel 40, then you have a electrically short antenna and need to pull out the whip (to make it longer) and tighten down when finished.