ProComm Flex Fiberglass CB Antenna
- Category: CB Antennas, Fiberglass CB Antennas
The ProComm FLEX CB antenna is made from a flexible 1/4" fiberglass core and wrapped with 22 gauge copper wire. This CB antenna has a 3/8" x 24 threaded base for almost any CB antenna mount. The jacket is made from a UV inhibited plastic which comes in black only. The ProComm FLEX CB antenna is pretuned to work on the CB band and can handle up to 500 watts.
The ProComm FLEX CB antenna has a 3/8" x 24 threaded ferrule which can be mated with any SO239 CB antenna stud mount. Remember after installation, make sure you tune your CB antenna using an SWR meter. For tuning instructions, see below.
What's In The Box
ProComm FLEX CB Antenna
Even though CB antennas say they are pretuned, what they mean is they are tuned to the CB band of frequencies, not to your particular vehicle. When you use your SWR meter, if the readings are not ideal, you can take the cap off the top of the CB antenna and cut the copper wire at the top. Don't cut too much at one time or you will be buying another one. Cut in small increments, take your readings until you get an ideal reading.
FTL Distributing offers a 2 year warranty on everything purchased here. To obtain warranty information on your product just send an email to email@example.com
The range of the ProComm FLEX CB antenna will vary greatly depending on surroundings, weather, etc. You can normally expect these ranges:
2' 2-3 Miles
3' 3-4 Miles
4' 4-6 Miles
Sizes & Colors
The ProComm FLEX CB antenna comes in 2', 3' and 4' models and is available in black or white.