ProComm Bulldog Fiberglass CB Antenna
- Category: CB Antennas, Fiberglass CB Antennas
The ProComm fiberglass CB antenna is a pretuned for the CB band. It is made from a 5/16" fiberglass core which gives it good strength in harsh conditions. The 20 gauge copper wire is wound precisely around the fiberglass core and has a UV inhibited jacket that comes in either black or white. If you are on a budget, the ProComm fiberglass CB antenna is a very good choice.
The ProComm fiberglass CB antenna has a 3/8" x 24 threaded ferrule to fit any SO239 antenna stud. After you install your CB antenna, remember to tune it with an SWR meter. See below section on tuning.
What's In The Box
ProComm Bulldog fiberglass CB antenna
Even though CB antennas say they are pretuned, what they mean is they are tuned to the CB band of frequencies, not to your particular vehicle. When you use your SWR meter, if the readings are not ideal, you can take the cap off the top of the CB antenna and cut the copper wire at the top. Don't cut too much at one time or you will be buying another one. Cut in small increments, take your readings until you get an ideal reading.
FTL Distributing offers a 2 year warranty on everything purchased here. To obtain warranty information on your product just send an email to firstname.lastname@example.org
The range of the ProComm fiberglass CB antenna will vary greatly depending on surroundings, weather, etc. You can normally expect these ranges:
2' 2-3 Miles
3' 3-4 Miles
4' 4-6 Miles
Sizes and Colors
The ProComm fiberglass CB antenna comes in 2', 3' & 4' models. You also get your choice of black or white.