Predator 10K CB Antenna

Predator 10K CB Antenna

The Predator 10K antenna is made from the lightest and strongest aircraft aluminum. Their products are well known for the craftsmanship and attention to detail. The Predator 10K antenna parts can be unbolted and replaced if necessary. The 10K antennas come with a limited lifetime warranty from Predator.
$ 69.95
  • Category: Air Cooled CB Antennas, CB Antennas, Featured Products, Predator Antennas

The Predator 10K antenna is hand built by one of the best manufacturer's in the industry.  Each piece can be removed if damaged and replaced with ease.  The Predator 10K antenna can withstand up to 10,000 watts of power and weighs considerably less than other competing antennas.  The stainless steel whip that is included with the Predator 10K is 58" tall and can be easily adjusted for a great SWR.  The Predator 10K antenna has many shaft sizes to choose from depending on the installation location.




Each Predator 10K antenna has a 3/8 x 24 threaded stud to fit into almost any mount on the market today.  The lightweight aluminum construction means that you don't have to use a large heavy duty mount if you don't want to.  The stainless steel whip fits into the top of the coil assembly and tightens down with the included allen wrench.


What's In The Box

  • Predator 10K Antenna
  • Allen Wrench
  • 58" Stainless Steel Whip



Predator offers a limited lifetime warranty on the 10K antenna.  This does not cover damages caused by abuse, misuse, negligence (i.e. hitting overhead objects, improper installation) are considered to be avoidable circumstances.  FTL Distributing also offers a 2 year warranty on the 10K antenna.  To obtain warranty information on your product just send an email to




The range of the Predator 10K will vary greatly depending on surroundings, weather, etc.  You can normally expect these ranges:

  7-10 Miles  



The Predator 10K antenna comes in 7 different shaft sizes.  3", 6", 9", 12", 17", 22" and 27" The main thing you want to remember when choosing your shaft size is you want a large portion of the antenna to be above your roofline for maximum performance.




The Predator 10K antenna has an allen screw easy SWR tuning.  If the SWR is greater on Channel 40 than on Channel 1, then you have an electrically long antenna and need to make it smaller by pushing the whip farther in.  If the SWR is greater on Channel 1 than on Channel 40, then you have a electrically short antenna and need to pull the whip out or you can add a spring or quick disconnect to make it longer.