Jeep Wrangler Complete CB Radio Antenna Kit Featuring Uniden PRO510XL
- Category: Jeep CB Radio Kits, Product By Vehicle
This Jeep Wrangler complete CB radio antenna kit includes everything you need to get yourself CB ready. The kit includes the Uniden PRO510XL CB radio which is very compact and can fit almost anywhere. The 5 antenna mounting possibilities covers you from the fender back to the tail light assembly on the CJ, TJ or JK models. The Firestik FSII CB antenna features a tuneable tip which allows for easy SWR tuning and comes in 4 colors and the FIREFLY comes in 3 colors. We have also included 18' of high quality coaxial cable with Amphenol PL259's for maximum performance.
CB Radio - Uniden PRO510XL
The Uniden PRO510XL is a quality built and inexpensive CB radio. The compact size makes it easy to install just about anywhere in your vehicle. The PRO510XL comes with an electret condenser microphone which is specialized because it uses power from the radio. The power cord is built-in so it can not be replaced by a standard 3 pin power cord.
CB Antenna - Firestik FSII Option 1
The Firestik FSII CB antenna has a heavy duty fiberglass core wrapped in heavy insulated copper wire which results in better performance than most other fiberglass antennas. The PVC covering has UV stabilizers for longer life even in the toughest conditions. SWR tuning is now a snap thanks to the Firestik FSII's tuneable tip which can be easily raised or lowered depending on tuning needs. Each FSII CB antenna includes a weather cap to protect your tuneable tip once your finished tuning. The Firestik FSII can also receive NOAA weather broadcasts (CB radio with weather capability required)
CB Antenna - Firestik Firefly Option 2
The Firestik Firefly CB antenna is very lightweight and flexible versus standard fiberglass antennas. The flexibility comes in handy when going through rough terrain as the Firefly can flex through overhanging obstacles. We recommend a medium duty spring to go along with the Firestik Firefly to add even more flexibility and durability.
CB Antenna Mount - Firestik SSJ4A Option 1
The Firestik SSJ4A was specifically designed for 1997-2006 Jeep Wranglers. This CB antenna mount easily installs in the hood groove of either the left or right side, but should be installed eight inches from the rear edge of the fender for adequate support. The stainless steel construction means this CB antenna mount will last you a very long time. The included K4A stud requires a PL259 terminated coax cable such as the Firestik K8A.
CB Antenna Mount - 2007 & Up Jeep Wrangler Fender Mount Option 2
For owners of the 2007 and up Jeep Wrangler, this CB antenna mount fits perfectly in the hood channel on the driver's side with no drilling required. The stainless steel construction means you never have to worry about unsightly rust.
CB Antenna Mount - Teraflex Driver's Side Tailight Mount Option 3
For Jeep Wrangler owners, the Teraflex CB antenna mount means quality. This powder coated mount installs in minutes and is designed for Wrangler CJ's, YJ's and TJ's Just pop your driver's side tailight off, and install. The Teraflex CB antenna mount can support almost any antenna with a proper stud mount. Fits Wrangler TJ Unlimited 04-06, Wrangler TJ 97-06, Wrangler YJ 87-95 Models
CB Antenna Mount - Teraflex Passenger Side Tailight Mount Option 4
For Jeep Wrangler owners, the Teraflex CB antenna mount means quality. This powder coated mount installs in minutes and is designed for Wrangler CJ's, YJ's and TJ's Just pop your passenger side tailight off, and install. The Teraflex CB antenna mount can support almost any antenna with a proper stud mount. Fits Wrangler TJ Unlimited 04-06, Wrangler TJ 97-06, Wrangler YJ 87-95 Models
CB Antenna Mount - Teraflex Spare Tire Carrier Mount Option 5
Teraflex has been making accessories for Wrangler's for years. The Teraflex CB antenna mount is a quality built mount for almost any antenna. Just pick yourself up a stud mount to go along with the Teraflex and your one step closer for a factory looking installation. The mount fits behind the spare tire and uses factory holes for a simple installation. Fits Wrangler JK Unlimited 07+, Wrangler JK 07+
CB Antenna Coaxial Cable - 18' Premium Mini 8 Coax Cable with PL259's
The premium coaxial cable jumpers are made from mini 8 coaxial cable which is much higher quality than the standard RG58. The stranded center conductor allows for easy routing in tight spaces. RF loss and interference is at a minimum thanks to the 95% shielding. Each Belden jumper is individually tested to make sure it is up to specs before it gets to your door.
SWR Meter - SWR Test Kit
This SWR meter testing kit includes the SWR meter itself and a 18" coax jumper. SWR testing is extremely important when setting up your new antenna. Just install all of your equipment, hook the meter up and start tuning to get the lowest SWR reading.
The Uniden PRO510XL includes a 12 volt power cable which should be installed directly to the battery for the cleanest power. The antenna mounts vary in installation time but are made specifically for the Jeep Wrangler to make your installation easier.
What's In The Box
Firestik FSII Series Fiberglass CB Antenna or Firestik FIREFLY CB Antenna
18' Premium Mini 8 Coaxial Cable with Amphenol PL259's
SWR Meter Testing Kit
Teraflex Tail Light CB Antenna Mount / Teraflex Spare Tire Carrier CB Antenna Mount / Firestik SSJ4A Fender CB Antenna Mount 1986-2006 / 2006 and Up JK Fender Mount
As with all of the products sold by FTL Distributing, the Jeep Wrangler Complete CB Radio Antenna Kit comes with a 2 Year Warranty.