Firestik R1A CB Antenna Quick Disconnect
- Category: CB Accessories, CB Studs, Springs and Quick Disconnects
The Firestik R1A antenna quick disconnect is made from high quality chrome plated brass and features a stainless steel center pin and spring for extra longevity. The R1A can be installed in just a few minutes and just requires a push and twist motion to remove or install your CB antenna. The Firestik R1A can be used on any compatible 3/8" x 24 threaded stud and antenna which is the most common type. The locking pin is on the outside of the quick disconnect so you can see if the antenna is locked down tight.
Simply install the Firestik R1A between the CB antenna mount and CB antenna. Once installed, to remove the antenna just push down and twist. Since the height of your CB antenna will change after installation, it is recommended that you use an SWR to re-tune your antenna.
What's In The Box
Firestik R1A Antenna Quick Disconnect
Firestik offers a 1 year limited warranty on the R1A. FTL Distributing offers another year warranty after Firestik's warranty has ended on the Firestik K1A. To obtain warranty information on your product just send an email to firstname.lastname@example.org
2.5" L x 0.6" W