Base Loaded Stainless Steel CB Antenna

Base Loaded Stainless Steel CB Antenna

The base load stainless steel CB antenna has a fiberglass base with a stainless steel whip antenna in 3 lengths. This base loaded CB antenna can be used with any CB radio and any antenna mount that has a 3/8 x 24 threaded stud like the Firestik K4A.
$ 19.95
  • Category: CB Antennas

The base loaded stainless steel CB antenna comes in 3 lengths, 3' ; 4' and 5'.  The fiberglass base has a 3/8 x 24 threaded stud that can be installed on any corresponding stud like the Firestik K4A.  The base is wound with 18 gauge copper wire for great signal quality.  All 3 lengths can handle up to 1,000 watts of input power.

Installation

Easily install the base loaded CB antenna onto any 3/8 x 24 stud mount such as the Firestik K4A.  The stainless steel whip gets tightened down by a allen screw.

What's In The Box

Base Loaded Stainless Steel CB Antenna

Warranty

FTL Distributing offers a 2 year warranty on the base loaded CB antenna. This does not cover damages caused by abuse, misuse, negligence (i.e. hitting overhead objects, improper installation) are considered to be avoidable circumstances. To obtain warranty information on your product just send an email to support@ftldist.com

Range

The range of the base loaded stainless steel CB antnena will vary greatly depending on surroundings, weather, etc.  You can normally expect these ranges:

3'   3-4 Miles
4'   4-6 Miles
5'   5-7 Miles

Sizes

The base load CB antenna comes in 3 lengths (3', 4' & 5')

Tuning

The base load CB antenna has a sliding whip for easy SWR tuning.  If the SWR is greater on Channel 40 than on Channel 1, then you have an electrically long antenna and need to make it smaller by pushing in the whip and then re-tightening.  If the SWR is greater on Channel 1 than on Channel 40, then you have a electrically short antenna and need to pull out the whip (to make it longer) and then re-tightening.

Power Handling


3'  - 1000 Watts
4'  - 1000 Watts
5'  - 1000 Watts