CB Antenna Mounts

A CB antenna mount can make or break your installation. FTL only carries quality CB antenna mounts because we are addicted to bringing you only the best products in the industry.

86 Item(s)

Page:
  1. 1
  2. 2
  3. 3
  4. 4

List  Grid 

Set Descending Direction
per page
  1. Firestik SS34AH Heavy Duty Combination CB Antenna Stud & Spring

    Firestik SS34AH Heavy Duty Combination CB Antenna Stud & Spring

    Save yourself a little installation time by getting a combination CB antenna stud and spring all in one unit, the Firestik SS34AH. This combo has a heavy duty spring which is made from stainless steel for a lifetime of use without the worry of rust. The stud portion has an SO239 input which requires the use of CB coax cable terminated with a PL259 connector. It can be used on any CB antenna mount with a standard 1/2" hole. This spring was made specifically for larger antennas up to 5' tall. Learn More
    $19.95
  2. Firestik MK174 Fender CB Antenna Mount Kit

    Firestik MK174 Fender CB Antenna Mount Kit

    The Firestik MK174 CB antenna mount kit includes a stainless steel mount and 18' of quality Fire Flex CB coax cable. The mount can be used on any vehicle with no more than a 2" fender groove. As shown in the images, it works on the 1999 Ford F350 series with ease. In this kit, the included CB antenna stud is the K4R which can accept the Fire Ring coax cable connector. This connection is one of the easiest to install and best performing out of all other connections. The 18' coax cable includes a PL259 to screw onto your CB radio, but is not installed to make routing much easier. The PL259 must be soldered on to make a proper connection. Learn More
    $29.95
  3. Firestik K6 CB Antenna Mirror Mount No Stud

    Firestik K6 CB Antenna Mirror Mount No Stud

    The Firestik K6 CB antenna mount can be used on vertical or horizontal mirror arms. By removing the back plate, you can also use this as a vertical side body mount on RV's or Jeep Wrangler tubs. The mount is made from chrome plated cold rolled steel for a lifetime of use. It does not include a stud mount so you can choose which type of stud you need for your installation. Learn More
    $14.95
  4. Firestik MK274R Adjustable CB Antenna Mount with 18' Coax Cable

    Firestik MK274R Adjustable CB Antenna Mount with 18' Coax Cable

    The Firestik MK274R CB antenna mount kit includes a stainless steel universal CB antenna mount. This mount can be installed on many vehicles with a hood fender up to 2" deep. It also adjusts front to back to compensate for installation angles that many vehicles have. A Firestik K4R stud mount is included that connects to the Fire Ring connector located on the CB coax cable. The cable is made from RG58 coax that is 95% shielded for maximum protection from RF leaks and interference. A PL259 connector is also supplied with the kit but is not installed to make routing the coax easier. It must be soldered on when ready to use. Learn More
    $32.95
  5. Firestik M164A CB Antenna Mirror Mount

    Firestik M164A CB Antenna Mirror Mount

    The Firestik M164A is made from solid aluminum for durability and strength. The dual groove design allows installation on round mirror arms. The hardware is all stainless steel for a long and rust-free life. Included with the mount is the K4A antenna stud which holds standard 3/8 x 24 threaded antennas up to 5' tall. Learn More
    $19.95
  6. Firestik M264A CB Antenna Mirror Mount

    Firestik M264A CB Antenna Mirror Mount

    The Firestik M264A CB antenna mount utilizes a single groove design which works great on most mirror arms. The mount is made from high quality aluminum and features stainless steel hardware. By removing the backplate, it can also be used as a vertical side body mount such as on RV's or Jeep Wrangler tubs. The included antenna stud is the famous K4A which has a 3/8 x 24 threaded design for most common antennas. CB coax cable terminated with a PL259 is required with this type of stud. Learn More
    $19.95
  7. Firestik MKDM18R Dome CB Antenna Mount with 18' Coax Cable

    Firestik MKDM18R Dome CB Antenna Mount with 18' Coax Cable

    The Firestik MKDM18R is a dome mount which can be installed on a roof or trunk. The included coax cable has a Fire Ring connector to keep the underside height to a bare minimum (0.710" to be exact) This makes it perfect for roofs because it can usually be installed under the headliner with no visible bumps. The mount is primarily made of glass reinforced nylon for extra strength and durability. It can hold fiberglass antennas up to 4' in height. The coax is 18' long and includes a PL259 which is not installed to make routing the cable much easier. Learn More
    $29.95
  8. Firestik DM164A CB Antenna Mirror Mount with Dome Stud

    Firestik DM164A CB Antenna Mirror Mount with Dome Stud

    For extra strength pick up the Firestik DM164A mirror mount. This mount has a double groove design for extra gripping strength on round mirror arms. The dome style stud mount holds antennas up to 4' tall and is compatible with any 3/8 x 24 threaded antenna. For even more strength, the mount is made from high quality aluminum and features stainless steel hardware. Learn More
    $24.95
  9. Firestik DM264A CB Antenna Mount with Dome Stud

    Firestik DM264A CB Antenna Mount with Dome Stud

    The most striking feature of the Firestik DM264A is the glass reinforced nylon dome stud. This stud not only looks great but holds any mobile antenna with ease. The coax input on the DM264A requires it to be terminated with a PL259 connector. The all aluminum construction gives this mount great strength and durability. The single groove design handles standard mirror arms on most trucks. You can also use this mount on vertical flat surfaces by removing the back plate. Learn More
    $24.95
  10. Firestik SS34H Heavy Duty Combination Stud & Spring Lug Style

    Firestik SS34H Heavy Duty Combination CB Antenna Stud & Spring Lug Style

    To help save you money, Firestik offers the SS34H heavy duty combination spring & stud. The spring and hardware is made from stainless steel for a lifetime of use. The stud is lug style so it requires ring terminal coax cable, but only requires 1/2" of clearance under the mount for extreme space savings. The spring/stud combo can hold antennas up to 5' in height. Learn More
    $16.95
  11. Firestik SS34M Medium Duty Combination Stud & Spring Lug Style

    Firestik SS34M Medium Duty Combination CB Antenna Stud & Spring Lug Style

    Combining the flexibility of a medium duty spring and a lug style CB antenna stud is the Firestik SS34M. This spring/stud combo holds standard fiberglass antennas up to 2' and lightweight flexible antennas up to 3' tall. The lug style stud mount requires coax cable terminated with ring terminals. To make installation as easy as possible, you can connect your coax after installing the spring/stud combo. It only requires 1/2" of clearance under the mount so it can be installed in almost any location. Learn More
    $14.95
  12. Firestik MK784R Trunk Lip Mount with 18' Coax Cable

    Firestik MK784R Trunk Lip Mount with 18' Coax Cable

    The Firestik MK784R is a combo CB antenna kit including the K74 trunk lip CB antenna mount and 18' of quality RG58 coax cable with a Fire Ring connector for your antenna and PL259 for your CB radio. The mount installs easily with no drilling necessary to almost any vehicle's trunk. There are two allen head screws to tighten the mount down and has padded feet to not damage your vehicle. The coax cable is Firestik's Fire Flex which has 95% shielding to prevent RF interference. The cable has a Fire Ring connector on one end to connect to the trunk lip mount and the other is left unprocessed to make routing through the vehicle much easier. Once finished, they have included a PL259 connector to be soldered onto the cable. Learn More
    $29.95
  13. Firestik SS34AM Medium Duty Combination CB Antenna Stud & Spring

    Firestik SS34AM Medium Duty Combination CB Antenna Stud & Spring

    The Firestik SS34AM is a combination CB antenna stud and spring all in one unit. The spring is a medium duty which means is can hold standard fiberglass antennas up to 2' tall and lightweight fiberglass antennas up to 3'. The stud portion has an SO239 coax input which requires PL259 terminated CB coax cable such as the Firestik K8A. Once the spring stud has been installed, it stands about 3 inches tall from the mounting point. Learn More
    $17.95
  14. Tall Freightliner Cascadia CB Antenna Mount

    Tall Freightliner Cascadia CB Antenna Mount

    The tall Freightliner Cascadia CB antenna mount is perfect for short antennas that don't quite go over the roofline. Now you don't have to worry about purchasing a large antenna for better signal with the tall Cascadia mount. This mount measures 40" tall and is made from high quality aluminum. The mount installs easily with the included extra long mirror bolts. This Cascadia mount also can tilt forward to get your antenna straight while you're at highway speeds. Learn More
    $69.95

    Out of stock

  15. Freightliner Cascadia CB Antenna Mount Installed

    Freightliner Cascadia CB Antenna Mount

    This Freightliner Cascadia CB antenna mount installs easily using two of the mirror bolts on the driver's side of the vehicle. This mount is made from quality aluminum for a long lasting finish. Simply mount a CB antenna mirror mount to the perch and add your antenna! Learn More
    $24.95
  16. Super Heavy Duty CB Antenna Mirror Mount

    Super Heavy Duty CB Antenna Mirror Mount

    The super heavy duty CB antenna mirror mount was designed for the largest mobile antennas. The mount itself is made from solid aluminum and has a super heavy duty antenna stud mount. The SO-239 stud is also made for large antennas such as Predator, Monkey Made and similar. Learn More
    $24.95
  17. Firestik Stake Pocket CB Antenna Mount Kit

    Firestik Pickup Truck Stake Pocket CB Antenna Mount Kit

     
    For those of you who own a pickup and need a CB antenna mount, Firestik has created the stake pocket CB antenna mount kit. This stainless steel mount clamps into your stake pocket on the bed rail with no drilling required. The included 18' RG58 coaxial cable has Firestik's famous FireRing connector for a perfect coax connection. The PL259 is included but is not attached for easy routing through tight spaces. This CB antenna kit requires soldering of the PL259 to the center conductor of the coax when finished routing. Learn More
    $36.95
  18. Firestik Mirror or Vertical CB Antenna Mount Kit

    Firestik Mirror or Side Body CB Antenna Mount Kit

     
    The Firestik MK64A8A CB antenna mount kit contains the versatile SS64A stainless steel antenna mount. This mount can be used on your truck via your mirror arm or just take the mounting plate off and use it as a vertical body mount such as on a Jeep Wrangler tub. The CB antenna mount can hold up to a 5' antenna depending on your installation. The included 18' coaxial cable has the K8A coaxial cable which has 2 PL259's terminated on the ends. Learn More
    $36.95
  19. Teraflex Jeep Wrangler Driver's Side CB Antenna Mount 1912091

    Teraflex Jeep Wrangler Driver's Side CB Antenna Mount 1912091

    For Jeep Wrangler owners, the Teraflex CB antenna mount means quality. This powder coated mount installs in minutes and is designed for Wrangler CJ's, YJ's and TJ's Just pop your driver's side tailight off, and install. The Teraflex CB antenna mount can support almost any antenna with a proper stud mount(sold seperately) Learn More
    $29.95
  20. Teraflex Jeep Wrangler Passenger Side CB Antenna Mount 1912092

    Teraflex Jeep Wrangler Passenger Side CB Antenna Mount 1912092

     
    The Teraflex CB antenna mount installs in minutes on the passenger side tail light. The powder coated construction is extremely durable under the most rugged conditions. This mount fits the Wrangler TJ Unlimited 04-06, Wrangler TJ 97-06, Wrangler YJ 87-95. Jeep Wrangler owners everywhere claim this is one of the best mounts on the market today. Learn More
    $29.95
  21. Teraflex Jeep Wrangler Spare Tire CB Antenna Mount - 4997190

    Teraflex Jeep Wrangler Spare Tire CB Antenna Mount - 4997190

     
    If you own a Jeep Wrangler JK and want a CB antenna, the Teraflex CB antenna mount is your answer. This powder coated mount provides a base for almost any CB antenna on the market. The Teraflex mount installs in minutes behind your spare tire using factory holes. Learn More
    $29.95
  22. Jeep Wrangler CB Antenna Mount For 2007 and Up

    Jeep Wrangler CB Antenna Mount For 2007 and Up

     
    For owners of the 2007 and up Jeep Wrangler, this CB antenna mount fits perfectly in the hood channel on the driver's side with no drilling required. The stainless steel construction means you never have to worry about unsightly rust. This mount includes a terminal stud mount for coax such as the Firestik K8. Learn More
    $19.95
  23. Toyota Tundra CB Antenna Mount

    Toyota Tundra CB Antenna Mount

     
    Get that custom factory look with a CB antenna mount for your 2007 and up Toyota Tundra. This CB antenna mount also fits the Sequoia and 4 Runner from the same years. The 2011 Toyota Rav-4 is also a vehicle this mount fits. Installation is a breeze since no drilling is required. It installs on the hood channel using factory bolt holes. The stainless steel construction means this mount is durable and will last you a long time. Just pick up some ring terminal coaxial cable such as the Firestik K-8 and you are good to go. Learn More
    $19.95
  24. Jeep Wrangler CB Antenna Mount JK 2007 and Up

    Jeep Wrangler CB Antenna Mount JK 2007 and Up

     
    Finally, a low cost alternative for your Jeep Wrangler JK. This CB antenna mount was specifically designed for the 2007 and up Jeep Wranglers, Rubicons and Liberties. It easily installs on the spare tire carrier for a flawless fit. Two quality nylon spacers keep the CB antenna mount in the proper position. The mount itself is made from high strength aluminum for years of durability and enjoyment. Make sure and purchase an antenna stud and coax to go with this mount like the K48R18 combo. Learn More
    $24.95
  25. Quad CB Antenna Magnet Mount

    Quad CB Antenna Magnet Mount

    The quad magnet CB antenna mount has four 5" black magnets for maximum hold. With four magnets you are able to mount the largest of the mobile CB antennas without fear of losing it. This mount has a 3/8 x 24 threaded stud for most CB antennas. Attached to the mount is 18' of premium coaxial cable with a PL259 installed. Learn More
    $49.95

86 Item(s)

Page:
  1. 1
  2. 2
  3. 3
  4. 4

List  Grid 

Set Descending Direction
per page

Back to Top