Customer Support

Search Site

CB Coax Cable / Connectors

Having good coax cable is very important in your CB radio installation. The standard coaxial cable is RG58 with a PL259 terminated on the end. We carry many different options in coax depending on your specific installation needs.

Items 1 to 25 of 30 total

per page
Page:
  1. 1
  2. 2

List  Grid 

Set Descending Direction
  1. AM/FM/CB Antenna Splitter

    CB/AM/FM Antenna Splitter

    $24.95

    This splitter was specifically designed to use your CB antenna as an AM/FM radio antenna. The IMAF has two 2' leads; one with a PL259 for your CB antenna and one with a motorola connector for your AM/FM radio. The splitter is very similar to the discontinued Firestik AR1A. Learn More
  2.  
    Premium Belden Mini 8 Coaxial Cable with Amphenol PL259's

    Premium Belden Mini 8 Coaxial Cable with Amphenol PL259's

    $9.95

    If you are looking for the best possible coax cable for your CB radio, these Belden mini 8 jumpers are 95% shielded and have individually hand soldered Amphenol PL259's. Learn More
  3. Firestik 18' Coaxial Cable PL259 Connection

    Firestik 18' Coaxial Cable PL259

    $19.95

    If you are looking for great coax to go with your CB antenna installation, look no further. The Firestik Fire-Flex coaxial cable is the best value around. It is a standard 18' long with (2) PL-259's terminated at either end. This type of cable can be used on any SO239 stud mount such as the Firestik K4A stud. Firestik uses a stranded center conductor to prevent breakage and is 95% shielded for maximum protection against RF leaks. Learn More
  4. Firestik MU8R18 EZ Install Coax Cable

    Firestik 18' EZ-Install Coaxial Cable

    $24.95

    Firestik has made it easy to install your CB antenna with their 18' EZ-Install coaxial cable. At one end, you have the famous Fire-Ring connection and on the other you have the very small FME connector which can fit through holes only 7/16" at opposed to finding/cutting a hole 1" or larger. Once the coax is routed, just screw-on the supplied FME to PL259 adapter and plug into your radio. The Fire-Ring connector is made for the K4R stud mount which has a little longer bolt than the standard K4 stud. The connection from coax to CB antenna with the Fire-Ring is unparalleled to any other system. Learn More
  5. Firestik K9A 18' Dual Coaxial Cable

    Firestik K9A 18' Dual Coaxial Cable

    $44.95

    The Firestik K9A is an 18' dual coaxial cable for your co-phase CB antenna installation. The K9A uses 3 PL259 connectors, two for your CB antennas which require SO239 type studs such as the Firestik K4A, and one PL259 for your CB radio. This Firestik coaxial cable is made from quality RG59 coax which has a stranded center conductor for protection against breakage from bending. If you are installing a dual CB antenna system, the Firestik K9A is the coax you will need! Learn More
  6. Wilson 18' Coaxial Cable with Easy Routing Connector

    Wilson 18' Coaxial Cable with Easy Routing Connector

    $29.95

    If you are routing your CB antenna coaxial cable and you don't want to drill a massive hole to accommodate a large PL259, this Wilson cable is a better alternative. The small FME connector can be routed through a much smaller hole and includes a PL259 adapter to hook up to your CB antenna mount. The Belden coaxial cable has 95% shielding to prevent RF loss and also has a black weather boot pre-installed for better moisture protection. Learn More
  7. Wilson 18' Coaxial Cable with PL259

    Wilson 18' Coaxial Cable with PL259

    $29.95

    If you are looking for the best CB antenna coaxial cable, the Wilson 305-820 is it. This jumper is made from Belden Mini 8 coaxial cable and Amphenol PL259's for the highest quality cable you can buy. Along with using high quality materials, you also get a black weather boot to protect your connection from moisture that can damage connectors. Learn More
  8. RoadPro Mini 8 Coaxial Cable PL259

    RoadPro Mini 8 Coaxial Cable PL259

    $10.95

    The RoadPro RP8X series of Mini 8 coaxial cable is among the best. Mini 8 is a high quality coax cable better suited for CB communications. This coax is 95% shielded to prevent RF signal loss and interference. The RP8X comes in 5 lengths to meet the needs of your installation. The outer jacket of the RP8X Mini 8 coax is a gray PVC coating and the PL259's are molded onto the ends for better moisture protection. Learn More
  9. Right Angle PL259 UHF Coaxial Connector

    Right Angle PL259 UHF Coaxial Connector

    $5.95

    If space is an issue for your coaxial cable, try the right angle male to female PL259 UHF connector. Learn More
  10. PL259 Connector with Reducer For Mini 8 Coaxial Cable

    PL259 Connector with Reducer For Mini 8 Coaxial Cable

    $5.95

    This PL259 connector includes a reducer for a perfect fit on Mini 8 coaxial cable or RG59. Replace your worn out connector or if you are building your own jumper, these are great connectors to use. Just strip your coax slide the PL259 connector on and solder the tip. Learn More
  11. Double Female SO239 Coaxial Connector

    Double Female UHF SO239 Coaxial Connector

    $5.95

    Easily join two coaxial jumpers together with this double female SO239 coax connector. Both coaxial cables need to have PL259's terminated on the end. This double female connector prevents you from having to purchase a longer piece of coaxial cable to complete your project if you already to two short pieces. Learn More
  12. Firestik 18' Coaxial Cable Ring Terminal Connection

    Firestik 18' Coaxial Cable Ring Terminal

    $17.95

    The Firestik Fire-Flex coaxial cable has a ring terminal connector for CB antenna studs like the K4 or other lug type studs. This Fire-Flex cable has a stranded center conductor to prevent breakage and is 95% shielded to prevent RF loss. If you have a lug type CB antenna stud, the Firestik Fire-Flex coaxial cable is the better choice for value and durability. Learn More
  13. Firestik K8R18 FireRing Coaxial Cable

    Firestik K8R18 18' FireRing Coaxial Cable

    $21.95

    The Firestik K8R18 FireRing coaxial cable has the best connections to your CB antenna in the industry. The FireRing connection is a low profile mounting system that works with a lug style stud such as the K4R. This 18' coaxial cable is made from RG58 which has a stranded center conductor for less breakage. The K8R18 also includes a PL259 connector for your CB radio, but is not attached for easy routing. The PL259 must be soldered when finished routing for a proper connection. Learn More
  14. UHF Lightning Arrestor

    UHF Lightning Arrestor

    $4.95

    Protecting your equipment should be very important to you. Adding an in-line lightning arrestor will help to protect your CB radio from lightning strikes. This "air gap" protection provides a gap in the line to prevent lightning from following your coaxial line to your radio. This UHF lightning arrestor should be grounded using the included connector. Learn More
  15. Wilson 18' Co-Phase RG59 Coaxial Cable PL259

    Wilson 18' Co-Phase RG59 Coaxial Cable PL259

    $39.95

    The Wilson 305-810 18' coaxial cable jumper is ready made cable for your dual CB antenna installations. Wilson uses Belden RG59 coaxial cable with Amphenol PL259's. Belden and Amphenol are the two biggest names in coaxial cable and the quality shows why. This coaxial cable has 95% shielding and a stranded center conductor for easier routing through tight spaces. Two black weather boots are also installed to help protect against moisture on your connections. This Wilson co-phase coaxial cable is the highest quality on the market today. Learn More
  16. Firestik K8NGP 17' No Ground Coaxial Cable

    Firestik K8NGP 17' No Ground Coaxial Cable

    $29.99

    The Firestik K8NGP coaxial cable is designed to replace the cable found on no ground antenna systems such as the LG series and FG series antenna kits. Learn More
  17. 18' RG58 PL259 Coaxial Cable

    18' RG58 PL259 Coaxial Cable

    $16.95

    Coaxial cable is an important part of your CB antenna/radio installation. This 18' of RG58 coaxial cable is terminated with PL259's which can be used on any SO-239 antenna stud. Learn More
  18.  
    Replacement CB Radio Speaker Cord w/ 3.5mm Plug

    Replacement CB Radio Speaker Cord w/ 3.5mm Plug

    $3.95

    This replacement CB radio speaker cord is great if you need to replace an old worn out cord or just need to add a little more length to your current cord. It is 10' long and has a 3.5mm right angle plug installed. Learn More
  19.  
    Amphenol PL 259 Connector

    Amphenol PL 259 Connector

    $3.95

    The Amphenol PL 259 is the best possible PL259 to use on your CB radio coaxial cable. To install on any other coaxial cable other than RG8, you must have a proper reducer. Reducers are made for Mini 8, RG58 and RG59 coaxial cable. Learn More
  20.  
    PL259 Reducer For Mini 8 Coaxial Cable

    PL259 Reducer For Mini 8 Coaxial Cable

    $1.99

    This PL259 reducer can be used in conjunction with most PL259's. It allows your standard PL259 to work on Mini 8 coaxial cable. Learn More
  21. PL259 Connector with Reducer For RG58 Coaxial Cable

    PL259 Connector with Reducer For RG58 Coaxial Cable

    $5.95

    This PL259 connector includes a reducer for a perfect fit on RG58 coaxial cable. Replace your worn out connector or if you are building your own jumper, these are great connectors to use. Just strip your coax slide the PL259 connector on and solder the tip. These will not work on Mini 8 coax! Try PL259-6X for Mini 8 Coax. Learn More
  22. RoadPro 100' Mini 8 Coaxial Cable PL259

    RoadPro 100' Mini 8 Coaxial Cable PL259

    $59.95

    The RoadPro 100' of mini 8 coaxial cable is perfect for your CB base station. Set your base CB antenna up and run this coax to your base station CB radio in your house. This mini 8 coaxial cable is 95% shielded for less signal loss due to RF leaks and other interference. The RoadPro mini 8 coax has two PL259's terminated on the ends for any standard base CB antenna and CB radio. Learn More
  23. Firestik K9 18' Dual Coaxial Cable Ring Terminal

    Firestik K9 18' Dual Coaxial Cable Ring Terminals

    $39.95

    The Firestik K9 is an 18' coaxial cable for dual CB antenna installations. The K9 has two sets of ring terminal connectors for your antennas and a PL259 to your CB radio. The Firestik K9 is made from high quality RG59 which has a stranded center conductor for maximum protection against breakage if bent. This dual coaxial cable can be used with any lug style antenna studs such as the Firestik K4. Learn More
  24. Firestik K48R18 18' FireRing Coaxial Cable K4R

    Firestik K48R18 18' FireRing Coaxial Cable with K4R Stud

    $24.95

    The Firestik K48R18 is an 18' RG58 coaxial cable with the famous FireRing connection for your antenna. It also includes the K4R stud which is specifically designed for the FireRing. The other end uses a PL259 connector for your CB radio, this PL259 is not attached for easy routing and needs to be soldered on when finished. Firestik uses a stranded center conductor for protection against breakage. Learn More
  25. Firestik 18' EZ-Install Dual Coax Cable

    Firestik 18' EZ-Install Dual Coaxial Cable

    $39.95

    Firestik has made your CB antenna installation a lot easier with the EZ-Install dual coax cable. You get two 18' RG59's with FME to the famous Fire-Ring connectors. The FME connectors are considerably thinner than the standard PL259 which means routing through tight spaces is a snap. When finished, Firestik includes a dual FME to single PL259 to connect to your CB radio. Learn More

Items 1 to 25 of 30 total

per page
Page:
  1. 1
  2. 2

List  Grid 

Set Descending Direction

Back to top